Can I put PPF on top of Ceramic coating?

You cannot put PPF on Ceramic. It will not stick - it may for a month or two at best, but then it will just come right off while you are driving. Ceramic coating prevents the adherence of ANYTHING to the car, so if the ceramic coating was applied properly the PPF will not stick.

What goes first PPF or ceramic coating?

However, it is best to have paint protection film applied first to protect your car from scratches and chips caused by road debris. Once these vulnerable spots are covered, you can have ceramic coating applied later on down the road.

What can I put on top of ceramic coating?

Just to set the record straight, yes, you can apply car wax to a ceramic coated surface. But it's going to cause far more issues than solutions. Routine cleaning, garage storage, and applying a high-grade SiO2 ceramic booster spray on top of your coating has proven time and time again to be the best form of protection.

Can you put Xpel over ceramic coating?

Can I have XPEL Paint Protection Film installed on top of my ceramic coating? We would not recommend this, as it may result in poor adhesion to the painted surfaces. Professional removal of the ceramic coating is recommended.

Can you spray over ceramic coating?

They not only add shine, but also additional protection, extending the life of your original ceramic application. These easy-to-apply spray waxes will boost the shine of your car's paint while adding yet another layer of protection on top of your ceramic coating.

Do I need Ceramic Coating on top of my 3M PPF (Paint Protection Film)?

What should you not do after ceramic coating?

Use only recommended mild soaps. Avoid high volume brush style car washes, and high PH detergent style cleaners. Avoid washing in direct sunlight to minimize streaking and water spotting. Wash from the top down leaving the dirtiest sections for last to avoid cross contamination.

Does Xpel PPF need ceramic coating?

A: Ceramic Coatings purpose is to keep your car clean for longer by preventing anything from sticking to the surface, so naturally, PPF will lift or even not stick at all when a Ceramic coating is applied before a PPF Application. Aways apply a Ceramic Coating after PPF installs and when the film has fully cured.

Does PPF stop stone chips?

Whilst a PPF won't stop a large stone from high speed damaging your vehicle, it will keep it protected from general stone chips and everyday wear and tear.

Can I clay bar PPF?

Can I use detailing clay on the film? Yes, detailing clay is similar to the regular paint. You need to wet the surface with a lubricant. Here you can use soapy water as lubricant and then rub the surface with a clay bar.

Can you double up on ceramic coating?

Yes, You Can Put Too Much Ceramic Coating on Your Car

Most professionals recommend that you put multiple layers of the protective coating on your car.

How do you prolong ceramic coating?

Wash the surface, then completely dry. Spray Prolong directly on the surface or microfiber cloth and wipe the area in a circular motion. Immediately after application, use a dry microfiber towel and gently buff the surface until dry and clear.

Does PPF scratch?

Working in a clean environment is the important part of installing PPF. In most cases, the condition of your vehicle also plays a huge part in a clean PPF installation. A swirl-free, scratch-free, rock-chip free, close to perfect finish is desirable.

Does PPF fill scratches?

Essentially, PPF is a thicker, stronger, yet lightweight material. It provides stain resistance, protection from stone chips, light scratches, bug splatter, swirl marks, and other paint damage.

Does PPF get swirl marks?

PPF is a proven solution for reducing the potential of swirl marks, light scratches, marring, and clear coat oxidation.

Which is better Xpel or 3M?

Self-Healing Properties

XPEL Clear Brand outperforms 3M when regarding self-healing properties. Even though 3M was the first company to enter the clear paint film industry, XPEL manufactured the first-ever self-healing film, which means that a scratched surface looks new shortly, even after a scratch.

How long does Xpel PPF last?

How long will paint protection film last? XPEL Clear Bra Paint Protection Film can last years. Our film is covered by a 10 year warranty, but as long as you take proper care of your film, it will continue to perform year after year.

Does Xpel turn yellow?

Depending on which film you choose, you WILL notice a slight bit of yellowing no matter what brand. Out of the roll for example, XPEL is slightly yellower than Suntek. Hence why if a client is after the aesthetics, we recommend Suntek on lighter cars.

Can you use clay bar after ceramic coating?

Three Way decontamination spray, Claying Rubber and the Clay Bars are suitable to use on a ceramic coating.

Will claybar remove ceramic coating?

The second method for removing ceramic coatings requires the use of a clay bar, clay mitt, or clay towel. While “claying” a vehicle is a crucial step in the surface prep process, cutting back on the amount of lubrication used turns this synthetic material into an incredibly potent ceramic coating removal tool.

How long does PPF take to cure?

Give PPF at least seven days to cure before washing the vehicle. If you are using a pressure washer, keep away from the film's edges. It could cause the edges to lift, reducing the protection. If you are planning to wipe the surface, make sure it's hydrated.

How often should you wash your car with ceramic coating?

This allows the coating to fully cure on your vehicle's surface. Once the 7 days have passed, we recommend that you clean your car at least twice a month to prevent contaminant build-up.

Can I polish ceramic coated car?

Unfortunately, no. Ceramic coatings are not standard finishes for vehicles, so polishes are not formulated to work with them. If you use polish on top of ceramic coating, you will strip the coating off of your vehicle, leaving it patchy and damaged.